BT Studio 3500 - Manual (Page 36)

Memory full
If there is less than 35 seconds recording time left in the
memory, the caller will hear, “Please complete your call within
35 seconds”, after the outgoing message and before
recording tone.
If the memory becomes full during recording the machine
announces, “Sorry, the memory full”, and ends the call.
When the memory is full, the machine automatically switches
to the Answer Only outgoing message.
Remote access
You can operate your answering machine from any
Touchtone
™ phone by calling your BT Studio 3500 and
entering a 3 digit security PIN code.
The default PIN setting is 000. To change it, see ‘Set the
security PIN code’ on page 38. Using a PIN code prevents other
people from accessing your machine without permission.
Operating your answering machine from another phone
1. Dial your telephone number. When you hear your outgoing
message, press
✱
. The machine announces, “Please enter
your security code”.
36 Using the answering machine
BT Studio 3500 – Issue 1 – Edition 2.1 –02.04.07 – 7999
If you experience any problems, please call the Helpline on 0870 605 8047 or email [email protected]
Your BT Studio 3500 can store up to a
maximum of 13 minutes recording or
59 messages.
8474 Studio 3500 UG Iss2 [2] 25/10/07 16:37 Page 36