Bang & Olufsen Beo5 - User Guide - Manual (Page 8)

Before you start
Before you start using your
Beo5 remote control for the
very first time, it must be
charged. Refer to page 14 for
information about how to
charge your Beo5.
Start using your Beo5 …
When fully charged, your remote
control is ready for use.
To activate the Beo5 display, just
pick up your Beo5 or touch the
screen lightly, and the display lights
up. Then select a button by a press
on the screen.
Useful hints …
Once a source is selected, most
operation is carried out via the
Beo5 ball – for example to adjust
volume, step through tracks or
channels and pause playback.
If you use your left hand to operate
the remote control, it is possible to
change the placement of the
buttons. Refer to page 16 for
further information or contact your
Bang & Olufsen retailer.
ST
O
P
PLA
Y
BA
CK
LivingRoom
TV
DVD
RADIO
CD
ST
O
P
PLA
Y
BA
CK
LivingRoom
TV
DVD
RADIO
CD
8
NOTE! We recommend that Beo5
is always in standby mode – not
switched off. However, if you wish
to switch your Beo5 on/off, press
and hold the centre button.
When you pick up the remote
control or touch the screen, the
display lights up.
Once the display is active, the
buttons appear on the screen. Press
a button to activate a source or
function.