Bang & Olufsen Beo6 - User Guide - Manual (Page 11)

11
Wireless setup
When configured for it, the Beo6
remote control is able to connect to
a wireless network. This enables
2-way communication with the
products, the Beo6 controls.
Connection can take place in
different ways depending on your
wireless network. Bang & Olufsen
recommends specific Network Link
access points. Contact your retailer
for more information.
It is important that you are in close
proximity to the access point you
are connecting the Beo6 to, when
making the setup.
Connections must be made to all
access points in your Bang &
Olufsen wireless network.
Note that only some Bang &
Olufsen products support 2-way
communication. See the Guides for
the products for information about
the functions and their operation.
From the factory the wireless module in
Beo6 is disabled. Therefore, before
connecting to a wireless setup, you must
enable the wireless module.
Enable the wireless module
> Select Wireless in the Setup menu.
> Press On/Off on Beo6.
> Select Enable on Beo6 – the active setting
is marked in red.
The wireless module in Beo6 uses power and
reduces battery run time. Therefore, we
recommend that you disable the wireless
module, if you cannot or do not wish to use
the wireless function.
Enable wireless communication
Wireless
Server IP
WPS Auto Manual
On/Off List Beo6 Info
The wireless setup menu.