Bang & Olufsen Beo6 - User Guide - Manual (Page 14)

14
List of networks
Beo6 automatically connects to the
access points you have connected to as
you move between them. However,
you can bring up a list of networks to
see their status and to remove
connections, if you want. Removing
connections may be useful if you move
or replace your access point.
Remove a network connection
> Select Wireless in the Setup menu.
> Press List.
> The list of connected networks appears in
the Beo6 display. Press the one you wish
to remove.
> Press Remove to remove the network.
> Press Back to leave the menu.
>> Wireless setup
Network problems
The Beo6 is a portable device and the
wireless function is dependent on the
wireless setup and coverage in your
house. A previously well-functioning
setup may develop problems over time
as surroundings change. If you experience
problems with your setup or have any
questions, contact your Bang & Olufsen
retailer.
See network information on Beo6
> Select Wireless in the Setup menu.
> Press Status.
> The status of the currently used wireless
network is shown in the display.
> Press Back to leave the menu.
List
Linksys 2
Cisco 1
Private Network
Zyxel
Albums
A Abbey Road
B Black Sabbath
Blind Faith
Blue Oyster Cult
C City Reading
List of networks you have connected to.
While operating a product wirelessly, you
can see the signal strength in the upper right
corner. The signal strength must be at least
two ‘lines’ to ensure operation.