Bang & Olufsen BeoTime - User Guide - Manual (Page 12)

Select a source you wish to be
switched on when the alarm
starts to sound.
When the selected alarm source
switches on, you will also hear
the sound of an ordinary built-in
alarm to make sure you wake
up.
You can snooze the alarm sound
by touching the alarm clock,
but the alarm source will not be
snoozed. The alarm source
remains on until an activated
alarm time out is executed or
until you switch off the source.
Depending on the selected
audio or video source, you can
also preset a channel, track, or
station to be played back. You
can select between 99 different
channels, tracks or stations.
To select an alarm source and
channel …
> Press from idle mode to enter
the menu in Display 1.
> Press or to select ‘ALARM
SOURCE’.
> Press or to enter Display 2 and
or to select the desired
alarm source or ‘NONE’.
> Press or to enter Display 3 and
or to select the desired
channel, track or station, if
available. Options are 01 – 99
and ‘NONE’.
> Press to leave the menu.
Select ‘NONE’ in Display 2 if you
wish to deactivate the alarm source
function. Select ‘NONE’ in Display 3
if you wish the source to switch on
the channel, track or station last
viewed or heard.
Select an alarm source
ALARM
SOURCE
TV 09
12