Bang & Olufsen BeoTime - User Guide - Manual (Page 14)

Set an alarm time out if you
wish connected audio and
video products to be switched
off at a certain time after the
alarm has been switched off. To select an alarm time out …
> Press from idle mode to enter
the menu in Display 1.
> Press or to select ‘ALARM
TIME OUT’.
> Press or to enter Display 2 and
or to select the desired
alarm time out.
> Press to leave the menu.
When the alarm time out has been
executed, the function is still
enabled and the same alarm time
out is activated the next time the
alarm is switched off. Select
‘NONE’ in Display 2 if you wish to
deactivate the alarm time out
function.
A horizontal line in Display 1 shows
the remaining time until connected
audio and video products switch
off. Options are ‘NONE’, ‘INSTANT’,
‘15 MIN’, ‘30 MIN’, ‘45 MIN’,
‘60 MIN’, ‘90 MIN’, and ‘120 MIN’.
Set an alarm time out
ALARM
TIMEOUT
30 MIN
7:00
OFF
15
14