Bang & Olufsen 3D Glasses - User Guide - Manual (Page 4)

English
With these glasses you can
enhance the experience of
watching television with 3D
technology, for example, when
you want to watch movies,
sports or nature films.
This product is specially
designed for your Bang &
Olufsen television.
Due to polarisation of 3D
glasses, some displays,
including Beo6, will appear
dark while wearing the 3D
glasses. You may try to turn the
remote control to a different
angle otherwise take off the
glasses while operating the
product.
Along with your glasses, you have
received three nosepieces in
different sizes to ensure optimal
comfort. You can easily change the
nosepiece.
Switch on your glasses …
> Press the button (1) to switch on
your glasses. See page 2.
> The LED light (2) will light briefly.
The LED light (2) will flash several
times when it is time to change the
battery.
Switch off your glasses …
> Press the button (1) to switch off
your glasses. See page 2.
> The LED light (2) will light briefly
and the glasses will close.
The glasses will switch off
automatically after a couple of
minutes without use.
If you look away from the
television screen, the glasses will
flash for a few seconds before
returning to normal viewing.
Very strong ambient light may
influence the glasses’ performance.
If your glasses do not work, the
battery may have expired and you
need to replace it with a new one.
See next page.
4
The product is intended for indoor
use in dry, domestic environments
only. Use within a temperature
range of 5–40°C (41–104°F).
Place the nosepiece as shown
above. You can remove the
nosepiece and change to a
different size at any time.