Bang & Olufsen 3D Glasses - User Guide - Manual (Page 5)

Battery replacement
> Open the battery compartment
(3), see page 2.
> Remove the battery.
> Insert the new battery. Make
sure that the + sign faces
towards the battery cover.
> Close the compartment again.
To ease removal of the battery
cover, gently push the side bar
outwards and use your thumb to
push the cover off.
Never close the battery compartment
if no battery is inserted. This will
damage the 3D glasses.
Note! You must use batteries of
the type CR2032.
Cleaning
Regular maintenance, such as
cleaning, is the responsibility of
the user. Wipe dust off the
surfaces using a dry, soft cloth.
Some micro-fibre cloths may harm
the optical coating due to their
strong abrasive effect.
To remove stains or dirt, use a soft,
damp cloth and a solution of water
and mild detergent, such as
washing-up liquid.
Never use alcohol or other solvents
to clean any parts of the product.
Never rinse your glasses under
running water.
Important health and safety
information for 3D pictures
Some viewers may experience
discomfort while watching 3D TV
such as dizziness, nausea and
headaches. If you experience such
symptoms, stop watching 3D TV,
remove the 3D glasses and rest.
Watching 3D TV for an extended
period of time may cause eye
strain. If you feel eye strain, stop
watching 3D TV, remove the 3D
glasses and rest.
If you use eye glasses or contact
lenses, wear the 3D glasses over
them.
Do not use the 3D glasses for
other purposes.
Adults should supervise children
watching 3D TV and ensure that
they do not experience any
discomfort as mentioned above.
It is recommended that children
under 3 years do not watch 3D TV.
>> English
5
CAUTION! Danger of explosion if
battery is incorrectly replaced. Do
not expose batteries to excessive
heat such as sunshine, fire or the
like!