Billion Electric Company 7100SG - Manual (Page 27)

Chapter 3 Configuration
23
3.4.2 Quick Start
If you use this device to access the Internet through the ISP, this web page is enough for you to configure
this router and access the Internet without a problem. Please check Chapter 3.3 (Information from the
ISP), then enter the proper values into this web page, click the Apply button and then click the Save
Config button to save all of the configuration parameters to FLASH. After the router reboot, you may
check the Status web page to check whether the router is connected to the ISP or not. In most cases, you
can access the Internet immediately. If not, please refer to the sections below for more information.