Billion Electric Company 7100SG - Manual (Page 33)

Chapter 3 Configuration
29
SSID : Enter the unique ID given to the Access Point (AP) built in the wireless broadband firewall
gateway. To connect to this device, your wireless clients must have the same SSID as that of this device.
Channel : Select the ID of channel you would like to use.
Security: Select Enable or Disable the function of Encryption to establish more secure environment for
wireless data transmission.
Encryption Key: Enter the key to encrypt wireless data. To allow encrypted data transmission, the WEP
Encryption Key values on all wireless stations must be the same as that of the device.
3.4.3.3.2 Advanced setting
Advanced wireless configuration page enables you to select Basic Rate and TX Rate.
Multiple choices are available in this part from at least 1M to 54M maximum.
3.4.3.3.3 WLAN Security
This session provides the setup function of WPA mode. You can enable or disable the Wi-Fi Protected
Access (WPA) to assure your wireless environment is under protection.