Brother, Brother & Sons Area48Soft Hardware - Manual (Page 4)

HARDWARE MANUAL
3
AREA48SOFT
WWW.BROTHERS-SONS.DK
SAFETY
Safety Notice:
It is important to read ALL safety information and instructions in this manual before install-
ing and operating the product described.
Safety symbol used in this manual:
WARNING: Potential injury or damage to persons or product.
WARNING:
It is important to read ALL safety and installation instructions to avoid any damage to the
product and potential injury to yourself and others.
This product is for professional use only and has been designed for indoor use. Exposure to
moisture may cause damage to the product and will void your warranty.
Do not operate the product if the ambient temperature exceeds 40°C / 104°F
Do not mount on flammable surface.
Ensure that the fixture is electrically connected to ground (earth)
Only use this product if all cables, connectors and the product itself are undamaged.
Damage caused by inadequate cleaning or maintenance is not covered by the product war-
ranty.
This is a product using High power LEDs. Do not stare directly into the LED at extended
periods of time at a short distance without suitable protective eyewear. Do not look directly
at the LED with optical instruments that concentrate the light output.
SERVICE:
Servicing is to be performed only by qualified personnel. Take precautions to avoid ESD
damage during service.
Disconnect the power before servicing the product.
MAINTENANCE:
This product requires very little routine maintenance, if any, but has special cleaning
instructions:
Disconnect fixture from power and allow it to cool for 10 min.
Very gently clean the LED with Isopropyl alcohol.
Clean the phosphor media with a soft damp cloth.
POWER:
Never connect to dimmer power.
The blue LEDs in this fixture is considered harmful to the eyesight. There is a
phosphor media lock installed. Do not circumvent it, it is there for your safety.
The lock will force the fixture shut down when the phosphor media is removed.