Brother, Brother & Sons Area48Soft Hardware - Manual (Page 8)

HARDWARE MANUAL
7
AREA 48 SOFT
WWW.BROTHERS-SONS.DK
REMOVING AND INSERTING PHOSPHOR MEDIA
TIGHTENING OR LOOSENING THE BARNDOORS
Pull the lock out and up, so that it rests on the top. This will push the media a little out.
Grab the media at the top and pull it out.
This is done by turning these two screws
either clockwise (tightening)
or counterclockwise (loosening).
The blue LEDs in this fixture is considered harmful to the eyesight. There is a
phosphor media lock installed. Do not circumvent it, it is there for your safety.
The lock will force the fixture shut down when removed.