Bendix Commercial Vehicle Systems 360CC SINGLE CYLINDER COMPRESSOR - Manual (Page 35)

35
Appendix E
Compressor Application
Increasing Performance
Point
Total
360cc Single 720cc Dual
School Bus / RV / Air over Hydraulic
any

City Transit Bus / Highway Travel Coach /
Express Route Coach
any

School Bus Rural Route (No Auto Brake) any

School Bus City Route (No Auto Brake) any

Pick-up & Delivery 2.5 - 9

9.5 - 13

Line Haul 3 - 6

6.5 - 9

9.5 - 13

Rural or Commercial Refuse 6.5 - 9

Rural or Commercial Refuse / Yard or
Terminal Jockey
9.5 - 13

Residential Refuse (with Work Brake) 6.5 - 9

Residential Refuse (no Work Brake) 9.5 - 13

Concrete Mixer / Dump Truck /
Off-Highway / Construction / Logger
4 - 9


9.5 - 13

Fire Trucks
6.5 - 9

9.5 - 13

Bulk Off-loader
any

Central Tire In
fl ation
any

Note: This compressor application matrix offers directional information when sizing a Bendix compressor for the applicable vehicle
vocation. Testing should still be performed on the speci
fi c application to verify that the compressor remains within the 25% maximum
allowable duty cycle. This application matrix assumes that all compressor installations use an air induction system that is naturally
aspirated. The “Compressor Installation & Application Review” form explains the methods used to measure the vehicle’s duty cycle.
Compressor
Selections
Point Totals
Bendix ® 360cc
compressor
Bendix ® 720cc
compressor
Points 2.5 3 4 5 6 6.5 7 8 9 9.5 10 11 12 13 14 15 16 or above
Certi
fi cation to all applicable vehicle regulations is the sole responsibility of the vehicle manufacturer.
The application chart is for reference only. If your truck/tractor does not fall into these guidelines, please contact the
Bendix Compressor Engineering or Technical Services team at 1-800-AIR-BRAKE.