Bendix Commercial Vehicle Systems BA-921 COMP - Manual (Page 6)

6
Bendix
®
BA-921
®
Compressor Installation and Application Review
Section III Vehicle/Engine Requirements and Expectations (cont’d)
Compressor Thru-drive:
Pump Drive (For new applications refer to Bendix Application Guideline
BW-100-A, BW-132-A or Compressor Customer Drawing)
Thru-drive to be used for: ______________________________________
Installed pump: ________________________________________
Vendor/PN:
___________________________________________
Operating torque: _______________________________________
Operating HP: _________________________________________
Worst-case torque (consider spikes and cold operation): _________
Worst-case HP (consider spikes and cold operation): ___________
Describe pump/motor control system:
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
Comments:
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
Page 6 of 18