Bird Technologies SH-362S-Manual - Manual (Page 122)

100
Figure 84 Windows Mobile Device Control Screen
19. Close the WMDC window.
20. Run the SH PC Tool to transfer traces or upgrade the Signal Hawk firmware.
Downloading and Installing Software
Note: These files are on the CD supplied with the SignalHawk, and
can also be downloaded from the website.
Note: For the latest versions of the PCTool, Microsoft
®
ActiveSync
®
,
and USB Drivers download them from the Bird Technologies Signal-
Hawk website:
http://www.bird-technologies.com/products/software/sh/
index.htm
Installing the SignalHawk USB Drivers
Note: The USB Drivers should be installed before the first time a Sig-
nalHawk is connected to a PC.
1. Click on “Install SignalHawk USB Drivers.”
2. Save the compressed file to the PC’s desktop.
3. Double click the compressed file on the PC desktop.
4. Click-and-drag the .inf and .sys files out of the compressed file window and
onto the PC desktop.
5. Connect the SignalHawk to the PC via the USB cable.