Blackline GPS Dart - Manual (Page 21)

19
Removing Dart from the Magnetic Mount Accessory
To remove Dart from the Magnetic Mount, use a screwdriver to remove the two screws
and slide Dart off from the Magnetic Mount.
Mounting Dart and the Magnetic Mount
The Magnetic Mount accessory is a versatile removable mount that contains a pre-installed
rare earth magnet providing 120 lbs of mounting force. The mounting surface must be a
flat metallic ferrous surface.
Mounting Dart with the Magnetic Mount Accessory
When mounting Dart with the Magnetic Mount Accessory, you may use the included
Cones of Silence Magnetic Silent Putty to eliminate the sound of the magnet snapping to
a metal surface.
To magnetically mount Dart:
1. The Magnetic Silent Putty is separated into two equal portions allowing for
two applications.
2. Roll one of the portions into a small ball.
3. Place the ball onto the magnet and store the remaining portion for future use.
4. Choose a location on a target’s vehicle to mount Dart.
5. Carefully place the Magnet Mount accessory to a mounting location ensuring that
the putty makes contact first.
™ For optimum GPS tracking performance, choose a mounting location where no metal
covers the top side of the Dart enclosure.
™ Do not mount Dart on or in close proximity to a vehicle’s exhaust system or areas of
high temperature.