Page 12, A001, Addr – Blizzard Lighting RGBAW ToughStick (Rev C) User Manual

Page 12: Flas or fade, Sp15, Sp00, Slav, Pr00- pr15

Advertising
background image

Page 12

ToughSTICK™ RGBAW Manual - Rev. C

Copyright (c) 2012 Blizzard Lighting, LLC

DMX Mode

Allows the unit to be controlled by any universal DMX controller.

1.) The default mode for the fixture is DMX, which appears as

A001

on the LED Readout. To

select a different DMX address, using the <MENU> button, select

Addr

,then hit <ENTER>.

Use the <UP/DOWN> buttons to select the correct address, then hit <ENTER> to confirm.

Stand-Alone, Master/Slave Modes:

Allows a single or Master/Slaved units to run factory installed programs at user selectable speeds.

1.) To set the fixture in Flash/Fade mode, select

FLAS or FAdE

To confirm, press the <ENTER> button.

2.) Now, select the flash or fade speed using <MENU> button to reach

SP--

, then hit

<ENTER>.

The display reads

SP15

(slowest) to

SP00

(fastest), then press the <ENTER> button to

confirm.

3.) To use the fixture in automatic mode, select

ASC-

, then press the <ENTER> button to

confirm.

4.) Adjust the speed of the chase as above using

SP15

(slowest) to

SP00

(fastest) then

press the <ENTER> button to confirm.

5.) To set the fixture as a slave unit, select

SLAV

, and hit <ENTER>. The menu display will

then flash

SLAV

. Once it stops flashing, the fixture is in slave mode.

Standalone (Program) Mode:

Allows a single unit to display a variety of colors and programs without a DMX controller.

1.) To set the fixture in manual mode, select

Pr--

.

To confirm, press the <ENTER> button.

2.) Now, select the program by using the <UP> and <DOWN> buttons to select

Pr00-

Pr15

. To confirm, press the <ENTER> button.

Pr00 = Red

Pr01 = Green

Pr02 = Blue

Pr03 = Amber

Pr04 = White

Pr05 = R+G+B

Pr06 = R+G+B+W+A

Pr07 = Program #1

Pr08 = Program #2

Pr09 = Program #3

Pr10 = Program #4

Pr11 = Program #5

Pr12 = Program #6

Pr13 = Program #7

Pr14 = Program #8

Pr15 = Pr07-Pr14 Chase

Program Descriptions:

Program #1: Red + G/B/A/W Segment Chase
Program #2: R/G/B/A/W Full Bar Chase
Program #3: R/G/B/A/W 3-Segment Chase #1
Program #4: Red+Green + B/A/W Segment Chase

Program #5: Red/Green/Blue Segment Chase
Program #6: Blue/Amber/White Segment Chase
Program #7: R/G/B/A/W In and Out - Full Bar
Program #8: R/G/B/A/W 3-Segment Chase #2

Advertising