Blomberg TKF 7431 A - Manual (Page 58)

58 EN
Time delay
With the “Time delay” function you can delay
the programme start up to 24 hours.
1. Open the loading door and put the laundry
in.
2. Set the drying programme and spin
speed, and if required, select the auxiliary
functions.
3. Press “Time delaying” buttons “+” and “-” to
set the desired time delay. The time delay
symbol will flash.
4. Press “Start/Pause/Cancel” button. Then
the time delay starts to count down. The
Time delay symbol lights up. Start symbol
lights up.
The “:” in the middle of the displayed time
delay will start flashing.
More laundry may be loaded or taken out
during the time delay period. At the end of the
time delay countdown process, time delay
symbol fades, drying process starts and the
programme duration is displayed. The time on
the display is the total of normal drying time
and delay time.
Time delay is started by pressing the start/
pause/cancel button in the exemplary figure.
Changing the delay time
If you want to change the time during the
countdown:
1. Press “Start/Pause/Cancel” button for 3
seconds to cancel the programme. Time
delay function must be set again for the
required time.
2. Press Time delay buttons “+” or “-” to set
the desired time delay.
3. Press “Start/Pause/Cancel” button. The
Time delay symbol lights up. Pause symbol
fades. Start symbol lights up.
4. The “:” in the middle of the displayed time
delay will start flashing.
Canceling the time delay
If you want to cancel the time delay countdown
and start the programme immediately:
1. Press “Start/Pause/Cancel” button for 3
seconds to cancel the programme.
2. Then, press “Start/Pause/Cancel” button to
start the desired programme.
Starting the programme
1. Press “Start/Pause/Cancel” button to start
the programme.
2. “Start/Pause” symbol will light up to
indicate that the programme has started
and “:” symbol between the remaining time
will continue flashing.
Progress of programme
Drying
Iron
Wardrobe
(Extra)
Ventilation
Anti-
creasing
The progress of a running programme is
shown through a number of symbols on the
screen.
At the beginning of each programme step, the
relevant symbol in the series of symbols will
light up and thus, all symbols will remain lit up
at the end of the programme. The symbol that
is lit up at the far right of the series of symbols
indicates the step that is being carried out.
“Drying”:
- Lights up in all programmes apart from drying
and ventilation.
“Iron Dry”:
- Starts to illuminate when the drying degree
reaches “iron dry” step and remains illuminated
until the next step.
“Cupboard Dry”:
-Starts to illuminate when the drying degree
reaches “wardrobe dry” step, and remains
illuminated until the next step.
“Cupboard Dry Extra”:
Starts to illuminate when the drying degree
reach to “wardrobe dry extra” step.
“Ventilation”:
- Illuminates when the programme ends.
C
Anti-creasing icon will light up at the end of
the programme if anti-creasing function is
active.
Changing the programme after the
programme has started
You can use this feature to dry your laundry
in a different program after your machine has
started to run.
For example;
Press and hold the “Start/Pause/Cancel”
button for about 3 seconds to “Cancel” the
programme in order to select “Extra Dry”
programme instead of “Iron Dry” programme.
Select the “Extra Dry” program by rotating the