Blomberg WNF 9447 ACE20 - Manual (Page 12)

12 EN
Auxiliary function selection
Select the desired auxiliary functions before starting
the programme. Furthermore, you may also select
or cancel auxiliary functions that are suitable to the
running programme by pressing the Start / Pause /
Cancel button when the machine is operating. For
this, the machine must be in a step before the auxiliary
function you are going to select or cancel.
Depending on the programme, press a, b, c or d
buttons to select the desired auxiliary function. Symbol
of the selected auxiliary function appears on the
display.
C Some functions cannot be selected together. If
a second auxiliary function conflicting with the
first one is selected before starting the machine,
the function selected first will be canceled and
the second auxiliary function selection will remain
active. For example, if you want to select Quick
Wash after you have selected the Prewash,
Prewash will be canceled and Quick Wash will
remain active.
C An auxiliary function that is not compatible
with the programme cannot be selected. (See
"Programme and consumption table")
C Auxiliary Function buttons may vary according to
the model of the machine.
• Prewash
A Prewash is only worthwhile for heavily soiled laundry.
Not using the Prewash will save energy, water,
detergent and time.
F1 appears on the display when you select this
function (a).
• Quick Wash
This function can be used in Cottons and Synthetics
programmes. It decreases the washing times and also
the number of rinsing steps for lightly soiled laundry.
F2 appears on the display when you select this
function (b).
C When you select this function, load your machine
with half of the maximum laundry specified in the
programme table.
• Rinse Plus
This function enables the machine to make another
rinsing in addition to the one already made after the
main wash. Thus, the risk for sensitive skins (babies,
allergic skins, etc.) to be effected by the minimal
detergent remnants on the laundry can be reduced.
F3 appears on the display when you select this
function (c).
• Anti-Creasing
This function creases the clothes lesser when they
are being washed. Drum movement is reduced and
spinning speed is limited to prevent creasing. In
addition, washing is done with a higher water level.
F4 appears on the display when you select this
function (d).
• Rinse Hold
If you are not going to unload your clothes immediately
after the programme completes, you may use rinse
hold function to keep your laundry in the final rinsing
water in order to prevent them from getting wrinkled
when there is no water in the machine. Press Start /
Pause / Cancel button after this process if you want
to drain the water without spinning your laundry.
Programme will resume and complete after draining
the water.
If you want to spin the laundry held in water, adjust the
Spin Speed and press Start / Pause / Cancel button.
The programme resumes. Water is drained, laundry is
spun and the programme is completed.
• Soaking
The Soaking auxiliary function ensures better removal
of stains ingrained into the clothes by holding them in
the detergent water prior to startup of the programme.
Time display
Remaining time to complete the programme appears
on the display while the programme is running. Tim is
displayed as “ 01:30 ” in hours and minutes format.
C Programme time may differ from the values in the
"Programme and consumption table" depending
on the water pressure, water hardness and
temperature, ambient temperature, amount and
the type of laundry, auxiliary functions selected
and the changes at the mains voltage.
Delayed start
With the Delayed Start function the startup of the
programme may be delayed up to 24 hours. Delayed
start time can be increased by increments of 30
minutes.
C Do not use liquid detergents when you set
Delayed Start! There is the risk of staining of the
clothes.
Open the loading door, place the laundry and put
detergent, etc. Select the washing programme,
temperature, spin speed and, if required, the auxiliary
functions. Set the desired delayed start time by
pressing the Delayed Start + or - buttons. Delayed
Start symbol flashes. Press Start / Pause / Cancel
button. Delayed start countdown starts. Delayed Start
symbol illuminates steadily. Start symbol appears.
“:” sign in the middle of the delayed start time on the
display starts flashing.
C Additional laundry may be loaded during
the delayed start period. At the end of the
countdown, Delayed Start symbol disappears,
washing cycle starts and the time of the selected
programme appears on the display.
Changing the delayed start period
If you want to change the time during countdown:
Press Start / Pause / Cancel button. “:” sign in the
middle of the delayed start time on the display stops
flashing. Pause symbol appears. Delayed Start symbol
flashes. Start symbol disappears. Set the desired
delayed start time by pressing the Delayed Start +
or - buttons. Press Start / Pause / Cancel button.
Delayed Start symbol illuminates steadily. Pause
symbol disappears. Start symbol appears. “:” sign
in the middle of the delayed start time on the display
starts flashing.
Canceling the Delayed Start function
If you want to cancel the delayed start countdown and
start the programme immediately:
Press Start / Pause / Cancel button. “:” sign in the
middle of the delayed start time on the display stops
flashing. Start symbol disappears. Pause symbol and
Delayed Start symbol flashes. Decrease the delayed
start time by pressing the Delayed Start - button.
Programme duration appears after 30 minutes. Press
Start / Pause / Cancel button to start the programme.
Starting the programme
Press Start / Pause / Cancel button to start the
programme. Start symbol showing the startup of the