Blomberg WMF 9649 WZE40 - Manual (Page 15)

15 / EN Washing Machine / User’s Manual
C
Programme time may differ from the values in the
"Programme and consumption table" depending on
the water pressure, water hardness and temperature,
ambient temperature, amount and the type of laundry,
auxiliary functions selected and the changes at the
mains voltage.
4.14 End Time
With the End Time function, the startup of the programme
may be delayed up to 24 hours. After pressing End
Time button, the programme's estimated ending time is
displayed. If the End Time is adjusted, End Time indicator
is illuminated. “End Time Setting” appears on the display.
Meantime, Start / Pause button flashes.
End Time
Setting
In order for the End Time function is activated and the
programme is completed at the end of the specified time,
you must press Start / Pause button after adjusting the
time. “End Time Enabled” appears on the display when you
press the button. Start / Pause button stops flashing and
remains illuminated continuously.
End Time
Enabled
If you want to cancel End Time function, press End Time
button until the End Time indicator turns off or press On /
Off button to turn off and on the machine.
C
Do not use liquid detergents when you activate End
Time function! There is the risk of staining of the
clothes.
1. Open the loading door, place the laundry and put
detergent, etc.
2. Select the washing programme, temperature, spin speed
and, if required, the auxiliary functions.
3. Set the end time of your choice by pressing the End Time
button. End Time indicator illuminates.
4. Press Start / Pause button. Time countdown starts. “:”
sign in the middle of the end time on the display starts
flashing.
C
Additional laundry may be loaded during the End Time
countdown period. At the end of the countdown, End
Time indicator turns off, washing cycle starts and
the time of the selected programme appears on the
display.
C
When the End Time selection is completed, the time
appears on the screen consists of end time plus the
duration of the selected programme.
4.15 Starting the programme
1. Press Start / Pause button to start the programme.
2. The Start / Pause button which was flashing starts to
illuminate steadily now, indicating that the programme
has started. “Programme starts” appears on the display
for 3 seconds.
Program Starts
3. Loading door is locked. "Locking Door" appears on the
display when the door is being locked.
Locking door
4. Programme step is indicated on the display.
Water Intake
4.16 Loading door lock
There is a locking system on the loading door of the
machine that prevents opening of the door in cases when
the water level is unsuitable.
"Door Locked" appears on the display when the loading door
is locked.
4.17 Changing the selections after
programme has started
Adding laundry after the programme has started:
If the water level in the machine is suitable when you
press Start / Pause button, "Opening door" will appear on
the display.
Stand-by
Opening door