Blomberg WMF 9649 WZE40 - Manual (Page 18)

18 / EN Washing Machine / User’s Manual
SETTINGS
< SOUND SETTING >
2. Turn the Programme Selection knob until the desired
sound option appears on the display in Sound Setting
menu.
3. If you want to unmute the sound, press the button of the
empty box on the lower right corner of the display when
"SOUND SETTING ON" is selected. Empty box gets filled
and “Sound Set” appears on the display.
4. If you want to mute the sound, press the button of the
empty box on the lower right corner of the display when
"SOUND SETTING OFF" is selected. Empty box gets filled
and “Turned Off” appears on the display.
Restoring the factory settings
When the factory settings are restored:
• Display language will return to the first language you
selected when you have operated your machine for the
first time:
• Brightness is set to maximum level,
• Sound is unmuted,
• Favoutite programme selection is returned to factory
settings.
1. Press Temperature Adjustment button and Spin Speed
Adjustment button simultaneously for 3 seconds to enter
the Settings menu. Press Soiling Degree or Temperature
button to open "FACTORY SETTINGS" menu.
SETTINGS
< FACTORY SETTINGS
2. To restore factory settings, turn the Programme
Selection knob until "Factory Settings" appears on the
display.
FACTORY SETTINGS
3. Press the button of the empty box on the lower right
corner of the display. Factory settings will be restored.
5 Maintenance and cleaning
Service life of the product extends and frequently faced
problems decrease if cleaned at regular intervals.
5.1 Cleaning the detergent drawer
Clean the detergent drawer at regular intervals (every
4-5 washing cycles) as shown below in order to prevent
accumulation of powder detergent in time.
1. Press the dotted point on the siphon in the softener
compartment and pull towards you until the compartment
is removed from the machine.
C
If more than normal amount of water and softener
mixture starts to gather in the softener compartment, the
siphon must be cleaned.
2. Wash the detergent drawer and the siphon with plenty of
lukewarm water in a washbasin. Wear protective gloves
or use an appropriate brush to avoid touching of the
residues in the drawer with your skin when cleaning.
3. Insert the drawer back into its place after cleaning and
make sure that it is seated well.
5.2 Cleaning the loading door and the drum
Residues of softener, detergent and dirt may accumulate in
your machine in time and may cause unpleasant odours and
washing complaints. To avoid this, use the Drum Cleaning
programme. If your machine is not featured with Drum
Cleaning programme, use Cottons-90 programme and
select Additional Water or Extra Rinse auxiliary functions
as well. Run the programme without any laundry in the
machine. Before starting the programme, put max. 100
g of powder anti-limescale into the main wash detergent
compartment (compartment nr. 2). If the anti-limescale is in
tablet form, put only one tablet into compartment nr. 2. Dry
the inside of the bellow with a clean piece of cloth after the
programme has come to an end.
C
Repeat Drum Cleaning process in every 2 months.
C
Use an anti-limescale suitable for the washing machines.
After every washing make sure that no foreign substance is
left in the drum.
If the holes on the bellow shown in the figure is blocked,
open the holes using a toothpick.