Boomba Racing ST Ford Focus Short throw shifter - Manual (Page 3)

1 Remove plastic vacuum hose from rubber
adaptor on the top of valve cover (leave
rubber adaptor in place).
29
Apply small amount of grease to the
shifter ball. Install the shifter lever
bushing.
30
Secure the shifter cover to the shifter
base.
31
Install the rubber grommet and the side
shift bushing.
32
Install the centering spring and the side
shift arm. Gently tap the side shift pivot
pin into position.
33
Install the shifter cables.
34
Secure the shifter assembly to the floor.
Reconnect the shifter links.
35
Install the center console.
36
Install the parking brake cover.
37
Install the change holder panel.
38
Install the left cover panel.
39
Install the trim panel and secure it with
screws.
40
Reconnect the power and the USB
connectors.
41
Install the right cover panel.
42
Line up the reverse lock with the shift
lever.
43
Install the shifter cover.
44
Install the shift knob. Turn the shifter knob
in until the reverse lock stops catching on
the shifter cover.