Brandmotion 9002-8525 User Manual
Installation instructions
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
8525 Instructions 7-18-13.doc
1 of 5
OEM Recessed Lip Camera with Harness and Slimline Twist Off Mirror
(Kit part number 9002-8525)
Please read thoroughly before starting installation
and check that kit contents are complete.
Items Included in the Kit:
Tools & Supplies Required:
Bubble bag containing:
Camera with Mount (in zip lock bag)
Camera Harness
Mirror
Chassis Harness
Zip lock bag containing:
12 Wire Ties
2 Rubber Well Nuts
2 Bolts
2 sets of T-taps
Zip lock bag containing:
These Instructions
Self-adhesive Template
Phillips Screwdriver
5/16” & 1/8” Drill Bits
Center Punch
Power Drill
Deburring Tool or Round File
Multi-meter or Computer Safe Test Light
Electrical Tape
Wire Crimper
Ground Eyelet
(Recommended)
Soldering Iron & Solder
(Recommended)
Rust Inhibitor
(Recommended)
Plastic Trim Removal Tool
Rubber Grommet or Silicone Caulk
(Recommended)
Vehicle service manual
(If needed)
Safety Precautions:
•
Work in well ventilated area that is clear of obstructions.
•
Secure vehicle with tire chucks in both front and rear of tires.
•
Turn vehicle accessories OFF and ensure ignition key is in OFF position.
•
Wear safety goggles and snug fitting clothes.
•
Use tools only for their intended purpose and which are in good repair.
•
Only perform this task if confidence, skill, and physical ability permit.
NOTE: We strive to provide accurate and up-to-date installation instructions. For the latest full color
instructions, as well as an installation video, (refer to relevant portions of the video for Kit # 9002-8530),
please visit www.brandmotion.com