Brother HL 1270N - Manual (Page 45)

CHAPTER 2 OPTIONS
2-3
How to add extra Memory
This printer has 4 Mbytes of standard memory and a slot for optional additional memory. The
memory can be expanded up to a total of 36 Mbytes by installing a commercially available
single in-line memory module (SIMM).
Additional memory is useful and may be necessary if you are using the Page Protection
function.
It will also help if you are printing a page that is complex or at high resolution or is a complex
PostScript Document.
This printer can accept memory SIMM with the following specifications:
Speed 60 nsec - 80 nsec
Pin Type 72 pin
Height 35.00 mm (1.38”) or
less
Output 32 bit or 36 bit
✒ Note
This printer can also support a resolution of true 600 dpi and 1200 x 600 dpi under Windows
®
95/98, Windows ® 3.1x and Windows NT ® 4.0 with the supplied printer driver. We recommend
that you expand the printer memory to avoid any memory full errors.
✒ Note
The printer has only one slot for a SIMM upgrade. If you want to increase your printer
memory again after you have already installed a SIMM module into the slot, you must remove
the previously installed SIMM first. For example, if you had previously increased the printer
memory from the standard 4MB to 12MB by adding an 8MB SIMM and you wish to increase
your total memory to 36 MB, you must remove the installed 8MB SIMM and install a new
32MB SIMM into the printer.