Base 1 handset 2 – BT classic 1100 Executive User Manual
Page 23
On-Air 1100 Executive user guide ~ Edition 5.1 ~ 4.7.00
23
Note
The number you save becomes the handset’s
name (ie. ‘Handset 1’). You can rename the
handset after registration, see page XX.
Press the UP button to scroll to the
BASE
menu.
Press OK to confirm.
Use the UP or DOWN buttons to
scroll to BASE SETTINGS.
Press OK to confirm.
Use the DOWN button to scroll to
HANDSETS
.
Press OK to confirm.
Use the DOWN button to scroll to
DE-REGISTER
.
Press OK to confirm.
Enter the System Code.
Press OK to confirm.
Use the UP or DOWN buttons to
scroll to the handset that you want to
de-register.
Press OK to confirm.
This will time out and go back to idle.
Or
Press the C button until you get back
to idle.
The handset is now de-registered.
To de-register a handset from
the base
▲
▲
▼
▼
▼
▲
▼
C
O
K
C
O
K
C
O
K
C
O
K
C
O
K
C
O
K
C
O
K
1 2 3
At the base:-
Press and hold down the PAGE button
on the base until it starts to flash.
On the handset:-
Use the UP button to scroll to BASE.
Press OK to confirm.
The display will show REGISTER.
Press OK to confirm.
Use the UP or DOWN buttons to
scroll to CUSTOM.
Press OK to confirm.
Use the UP and DOWN buttons to
scroll to the required base number.
Press OK to confirm.
At this stage if you require you can
edit the base name.
Press OK to confirm.
Enter the PIN code using the keypad.
Press OK to confirm.
The display will now flash SEARCHING
FOR BASE
.
You will then see a list of the available
handset numbers.
Use the UP and DOWN buttons to
scroll to the number you require.
Press OK to confirm.
After a few seconds the handset will
be registered and display:
C can also be pressed to return
to idle.
To register a handset to a base
station (if you have changed the
System Code from 0000)
▲
▲
▼
C
O
K
C
O
K
C
O
K
C
O
K
Base 1
Handset 2
On-Air 1100 Executive 4/7/00 1:48 pm Page 23