Brew Express BE-112 INSTALLATION - Manual (Page 2)

CONT EN TS
1. Getting Started 1
2. Safety 2
3. Hardware/Tools 3
4. Specifi cation and Requirements 4
5. Location (area of Installation) 5
6. Water Installation 6
7. Power Installation 7
8. Brewer Installation 8 - 11
9. Testing 9. Testing 12
10. Troubleshooting 10. Troubleshooting 1 1 1 10. Troubleshooting 10. Troubleshooting 10. Troubleshooting 10. Troubleshooting 3
1
GET TING STARTED
IMPORTANT:
Read and follow instructions carefully before installing your BREW EXPRESS™ in-the-wall
COFFEE SYSTEM. For best results its advised that you hire a qualifi ed professional.
Getting Started
1. Carefully unpack BREW EXPRESS™ from gift box.
2. Remove carafe from brewing unit and set aside.
3. Using a Philips screwdriver remove the four mounting
screws and gently separate the brewer from rough-in-box.
Please note that mounting screws may not be present
for removal.
4. In the event it may be necessary to return BREW EXPRESS™
It is advised you do not discard packing material.
Lance-Larkin™ will not be held responsible for damage
due to shipping.
2
2