Operation – Brew Express BE-110 OPERATION GUIDE User Manual

Page 9

Advertising
background image

7

OPERATION

7. Manual Brew Cycle

To manually start a brew cycle press the “Brew” button. The brew light will turn red once the cycle has started. If brewer is cold,

the heater will preheat the water before starting the brew cycle. After the selected amount of water is

dispensed, the brew light will blink for 40 seconds. At that time the BREW EXPRESS will beep 4 times.

8. Automatic Brew Cycle

To automatically start a brew cycle press the “Timer” button every time. The button will illuminate and the start time will blink

5 times on the clock display. Each time you desire auto-brewing, you must push the timer button to illuminate the button to

green color.

To program the start time:

Press and hold the “Timer” button for 5 seconds until clock flashes.

Press the cup selector button to set hours. Note AM/PM indicator light. Holding down button advances hours.

Press the “Timer” button to set the minutes. Holding down button advances minutes.

Press “Light” button to finish time setting to lock memory before clock flashing ends.

9. Pause-N-Brew Feature

The BREW EXPRESS carafe can be removed during brew cycle to pour a cup of coffee. The detection sensor will stop

the flow of water and the valve on the brew basket will prevent existing water from spilling. Once carafe is

returned, operation will continue. If carafe is missing for over 5 minutes, BREW EXPRESS will shut off automatically.

10.

Accent Lights

To turn on and off the accent lights press the “Light” button. The accent lights are located behind the brew basket.

11. Sound Setting (Beeper On/Off)

At the end of a brew cycle a beeper is sounded 4 times.

To turn off the beeper:

Press and hold the “Brew” button for 5 seconds.

A single beep will indicate the sound is off. Also, the beeper indicator light will be off.

Two beeps will indicate the sound is on. Also, the beeper indicator light will be on.

12. Optional Carafe Lock

An optional carafe lock is available. This device prevents the carafe from moving in mobile applications (marine, recreational

vehicles), or it prevents accidental removal by children.

The carafe locks consists of a lock

lever and spring. It installs easily

by depressing the sides of the lock

lever until the pins slide into the

mounting holes on the brew basket.

The spring slides over a pin on the

back of the brew basket and into a

hole on the lock lever.

lock lever and spring

depress sides of lock

lever to install

Advertising
This manual is related to the following products: