Brinno MAC100 - Manual (Page 6)

Insert SD card included into your computer or notebook.
Run " HomeWatchCam Setup" program to set date and time.
At Brinno HomeWatchCam Date and Time program:
A. Set time
B. Set date
C. Select a drive letter assigned to your SD card drive.
D. Select "OK" to save setting file to SD card.
Remove the SD card from your computer, then go to next step.
Before using your HomeWatchCam, please set the correct date and time, follow below steps:
4
SD
SD
1
4 3
2
HomeWatchCam
Setup
1
A
B
C
D
2
3
4
Initial Setup-2 Set Date and Time
Brinno Motion Activated Camera MAC100