Brinno MAC100 - Manual (Page 8)

A°
B°
2
1
3
Installation Basic Installation
6
About Motion Sensor
A°
: Detecting Angle: 98°
B°
: Detecting Distance: 4 meters
4
1 second
15 seconds 3 circles
The Motion Sensor detecting angle: 98°, detecting distance: 4 meters.
Insert Mounting Holder into HomeWatchCam.
Hold power button for 1 second to turn on HomeWatchCam.
Ready to capture any movement!
The Green LED will light on for 15 seconds to Warm up Motion Sensor, once the Green
LED light stops that your HomeWatchCam is ready to work.
When the Motion Sensor activated at first three times, the Green LED light will flash
during capture period, so you can test if the HomeWatchCam works well.
Place the HomeWatchCam to the detecting area you want to capture:
A. Mounting on the wall.
B. Place on a plane.
1
2
4
7
5
6
3
5 6 7
Brinno Motion Activated Camera MAC100