Brinno BCS 24-70 - Manual (Page 2)

Avoid to storing the lens in
high-temperature, high-humidity
locations.
Remove the bottom lens cover and turn the BCS 24-70 clockwise to
install the lens on the TLC 200 Pro.
Be careful when using different lens, the TLC200 Pro may tip
over due to the gravity center shift especially without battries.
DUST FINGERPRINT
MODEL
MOUNT TYPE
FOCAL LENGTH
APERTURE
ANGLE OF VIEW
FOCUS DISTANCE
SIZE
WEIGHT
BCS 24-70
CS-mount
24-70 mm
F1.4 ~ 2.4
94 ~ 38˚
Tele 1cm ~ ∞
Wide 10cm ~ ∞
Ø32x40 mm
61 g
To Insure Long Term Use
5. Specification
4. Focus Adjustment
For more information, please refer to TLC200 Pro manual page16 .
Go to the “Focus” menu( Time Lapse Camera TLC200 Pro ), see the
enlarge preview screen. Rotate the lens to focus object.
7F, No.75, Zhou Zi St., Taipei City 11493, Taiwan
Phone:+886-2-8751-0306 Fax:+886-2-8751-0549
[email protected]
Thank you for purchasing Brinno Time Lapse Camera Accessories!
If you have any questions or problems setting up your Brinno TimeLapse Camera
please contact the sales staff where you purchased our product or email us at
Brinno Incorporated directly: [email protected]
3. Installation
3-3 To install Brinno Lens (BCS 24-70) on TLC200 Pro
Focus
OK
Adjust the lens focus
FOCUS
Aperture
ZOOM
Manully set up
Tighten the screw,
after setting.
301-0065-00 (EN A1)