brite-View Air Sync3D BVW-200 User Manual - Manual (Page 16)

15
(5) Ensure your TV set or projector is in “HDMI input” mode, and is already powered on.
(6) If all operation is normal, the POWER LED and INFO./CHANNEL LED will glow in solid blue.
Please refer to the below form containing detailed LED indicator and OSD description of
transmitter / receiver:
Item /
Mode
Status Description
Power LED
(on RX)
Status LED
(on RX)
OSD Display
(on RX)
Standby For power saving mode. Static Red off
Initial Boot
up / Warm
up
It will spend 15 ~ 20
seconds for system boot
up.
Blinking
Blue
Blinking
Searching
available
channels
Continuing search
available channels If
system can’t establish
link over 80s after
initialization.
(Note A & D)
Blinking
Blue
Blinking
Looping display
these two OSD
4 level, looping.