Brother, Brother & Sons Aledin2 rev. 2.0 - Manual (Page 10)

USER MANUAL
9
ALEDIN 2
WWW.BROTHERS-SONS.DK
AC Power
DMX Data link
This fixture must be connected to ground.
Electrical:
AC Power: 100 – 240 V nominal, 50/60 Hz
Powersupply: Electronic switchmode
Max power consumption: 200 w
This product uses a 5-pin XLR for dmx input and output.
Use shielded data cables.
Do not overload the daisy chain. Up to a maximum of 32 devices can be used on a single dmx
chain.
DMX Channels:
1 at 8bit: Dimmer
3 at 8bit: Dimmer w. strobe
2 at 16bit: Dimmer
4 at 16bit: Dimmer w. strobe
Protocol: USITT DMX512-A
SOFTWARE UPDATE
Software can be updated via DMX512 with UPLOADER from Brother, Brother & Sons ApS
and the latest software version can be found on www.brothers-sons.dk.
user manual revision 1.0