Aledin 2, Specifications, User manual – Brother, Brother & Sons Aledin2 rev. 2.0 User Manual
Page 14
USER MANUAL
13
ALEDIN 2
WWW.BROTHERS-SONS.DK
SPECIFICATIONS
Physical (Additional - when mounted):
Depth:
0 mm / 0”
Width:
0 mm / 0”
Height:
97 mm / 3,82”
Weight:
2,3 kg / 5 lbs
Data:
DMX Channels:
1 ch. at 8bit / 2 ch. if strobe channel is enabled
2 ch. at 16bit / 3 ch. if strobe channel is enabled
Protocol: USITT DMX512-A
Data In/Out: 5 pin locking XLR
Electrical:
Never connect to dimmer power
Neutric PowerCon
AC Power: 100 – 240 V, 50/60 Hz
Powersupply: Electronic switchmode
Max. power consumption: 200 W.
Max Amp.: 0.9 amps at 230V / 1.7 amps at 120V / 2 amps at 100V
This fixture must be connected to ground.
Thermal:
Maximum ambient temperature - t.Amb: 40° C / 104° F
Minimum ambient temperature - t.Amb: 5° C / 41° F
Cooling t.Case (temperature as shown in display):
Below 64° C / 147,2° F Convection cooled
Above 64° C / 147,2° F Forced silent fan cooling
Above 70° C / 158° F Forced dimming
Above 73° C / 163,4° F Forced Lamp Off
Specifications subject to change without notice. For the latest specifications see
www.brothers-sons.dk
user manual revision 1.0