Bully Dog 42213 Dodge Ram 2500-3500 6.7L 2013 - Manual (Page 4)

3
PCM UNLOCK
3. Remove the two 10mm bolts located towards the rear
of the vehicle securing the rear PCM wiring harness
connector.
4. Remove the two 8mm bolts located towards the front
of the vehicle securing the front PCM wiring harness
connector.
B: Disconnecting the PCM Wiring Harness
1. Disconnect the PCM Wiring Harness Connector by first
pressing and holding the button located on the top side
of the connector. With the button depressed lift the
lever to disconnect the PCM Wiring Harness Connector.
IMPORTANT: Keep release button depressed while pulling the release lever
release button