Bully Dog 40630 CAT 3126, C7 and C9 engines - Manual (Page 14)

13
Your computer will not recognize the Module until the Driver is installed.
1) Remove cover from Rapid Power Module
2) Plug Module into PC using a USB cable (Male A end for PC, Male B end for Module: Same type of
cable as used for most printers)
3) Windows will recognize the Module and attempt to install software.
4) If Windows asks if it can connect to Windows Update to search for the software select NO, not at
this time. Select Next to continue.
5) Select Install Automatically, then press next.
6) Windows will ask you to select the software you would like to install. Select BDT Rapid Power
USB and select next.
inTerneT uPdATe
USB Driver Installation (
Windows XP only!)
IMPORTANT: Install the Update Agent prior to plugging in your module .