Bully Dog 53105 Rapid Flow Induction (RFI) Cold Air Intake - Manual (Page 5)

4
RFI COLD AIR INTAKE
Silicone Couplers
The high-quality 3-ply
couplers are durable,
flexible and strong.
Band Clamps
Adjustable clamps connect
and hold all tubing in place.
Black Oxide Phillips
Screws and Washers
Bully Dog provides two 3/8”
black oxide screws and
nylon washers to secure the
MAF sensor to the RFI MAF
tube.
T20 and T30 Security
Torx® Bits
The mass air flow sensor
and resonator are secured
in the engine bay with
tamper resistant pin-
in-Torx® screws. Bully Dog includes two Torx® bits for
convenience. If the bits are lost they can be purchased at any
auto parts store.
MAF Sensor Gasket
A soft gasket with adhesive
backing ensures a good
seal for the MAF sensor
when it is attached to the
Stage 2 RFI Tube.