Bully Dog 82410 Rapid Flow - Manual (Page 6)

7
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 82410
QUICk OVERVIEw FULL EXHAUST
Muffler
Tail Pipe Tip
Down Pipe
CLAMP AND HANGER PLACEMENT
Hanger A
Front Piece Tail Pipe
Straight Pipe
Catalytic Converter
(Stock)
Hanger B
Hanger C
Hanger D
Clamp
(3 pieces)
Clamp
In these steps you will install the rapid Flow Exhaust System.
1. It is suggested that before installing the system on the truck, the Rapid Flow Exhaust System be laid out on a
large flat surface to acknowledge the location of each piece
tool s needed:
Silicone Spray Lubricant •
9/16” Wrench •
7/16” Deep Socket •
Socket Wrench •
tape measure •
INSTALLATION OF THE BULLy DOG RAPID FLOw EXHAUST SySTEM