Bully Dog 82410 Rapid Flow - Manual (Page 7)

8
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 82410
2. Hang each of the hangers. Hanger A is on the Down
Pipe, Hanger B and C will serve a dual purpose, serv-
ing as both hangers and clamps. Hanger B will be at
the front of the Muffler and Hanger C will be at the
rear of the Muffler. Hanger D will hold the Tail Pipe
Tip.
3. Install the Down Pipe by hanging it from the hanger
and securing it to the turbo with the stock band
clamp. When installing the Down Pipe in order to
get it to seal correctly with the turbo, do not put
hanger A on until you have a good seal on the turbo.
Once you have the down pipe on the turbo sealed
correctly then attach hanger A to the down pipe.
4. Weld Catalytic converter to the downpipe.
5. Weld Straight pipe to Catalytic converter.
Hang the Hangers
Hanger C
Hanger B
Install Down Pipe
Down Pipe
Stock Band Clamp
Loosen Bolt if Necessary
Down Pipe
Hanger A