Bully Dog 81222 Rapid Flow - Manual (Page 6)

7
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 81222
INSTALLATION OF THE BULLy DOG RAPID FLOw EXHAUST SySTEM
In these steps you will install the Rapid Flow Exhaust System.
1. It is suggested that before installing the system on the truck, the Rapid Flow Exhaust System be laid out on a
large flat surface to acknowledge the location of each piece
CLAMP AND HANGER PLACEMENT
Hanger A
Hanger B
Hanger D
Hanger E
Clamp
Clamp
Hanger C Clamp
Clamp
Clamp
Clamp
QUICk OVERVIEw FULL EXHAUST
Muffler
Straight Pipe
Down Pipe
Passenger Tail Pipe Tip
Intermediate Pipe
Driver Front Piece
Tail Pipe
Y-Pipe
Driver Tail Pipe Tip
Passenger Front
Piece Tail Pipe
Tool s Needed:
Silicone Spray Lubricant •
9/16” Wrench •
7/16” Deep Socket •
Socket Wrench •
Tape Measure •