Brinkmann 810-5503-S - Manual (Page 5)

4
Choose a good, cleared assembly area and get a friend
to help you put your smoker together. Carefully remove
all components from Smoker Box. Lay cardboard down
to protect smoker finish and assembly area.
Step 1
Mount the door handle with two M5 X 10 mm
bolts. Insert each bolt through the door from the
inside. Then thread the bolts into the handle.
Tighten each bolt securely. Repeat steps for
bottom door.
Step 2
Attach side handles to smoker using four
M6 X 12 mm Phillips head bolts, star washers and
M6 nuts.
WARNING: Use caution when lifting or moving
smoker to prevent strains and back
injuries. Moving smoker may require the
help of an additional person.
NOTE: With the help of a friend, turn the smoker box
upside down. Make sure door is securely
latched to avoid injury.
Step 3
Attach legs to bottom of smoker using twelve
M6 X 12 mm Phillips head bolts.
300 200 100 50
400 500 600 700
INS_810-5503-S.qxd 11/9/09 11:05 AM Page 5