Cleaning the pick-up roller, Replacing the ink cartridges, Warning – Brother MFC-730 User Manual
Page 196
184
C H A P T E R
T W E N T Y
Cleaning the Pick-up Roller
1
Remove the Feeder from the printer platen.
2
Wipe the pick-up rollers with a cloth moistened with isopropyl
alcohol.
Pick-up Rollers
Multi-Purpose
Sheet Feeder
3
Refit the Feeder to the printer platen.
WARNING
■
Be sure to unplug the MFC from the main power outlet before
cleaning the printer platen and pick-up roller.
■
Be careful not to touch the paper feed star wheels and flat cable.
Replacing the Ink Cartridges
Your MFC is equipped with an ink dot counter that automatically
monitors the ink level in each colour cartridge. When the counter detects
an ink cartridge is running out of ink, the MFC will notify you by
lighting the “Ink Empty” LED.
Ink Empty LED Blinking =
One or more Ink Cartridges are low.
Ink Empty LED On
=
One or more Ink Cartridges are empty.
The display shows you which colour cartridges are low or empty. Be sure
to follow the display prompts so you replace the colour cartridges in the
appropriate order.
When the ink cartridges are running low, you must use
Ink
Management
to begin the cartridge replacement (Steps 1–3). If the
ink is empty, skip to Step 4.