Calculated Industries 5070-B Pocket Reference Guide - Manual (Page 31)

P
ocket
R
efeRence
G
uide
— 31
(cont’d)
KEYSTROKE DISPLAY
  0.
1. Find Equipment Ground Wire Size:
  

(EqGrnd) EQPG 10 Cu
WIRE SIZE
2. Find Aluminum size:
 EQPG 8 AL
WIRE SIZE
fuse anD CIRCuIT
bReaKeR sIZe
Fuse and Breaker sizing is
determined by NEC Table 430.52.
Once the Motor Type is defined
via   , a Full-Load Current
amperage value can be used to find
the Fuse Breaker Sizes.
What is the Dual Element Fuse
size for a 230 Volt, 3-Phase, 50 HP
Induction motor?
KEYSTROKE DISPLAY
  0.
1. Set to 3-Phase:
  (3Ш)
3Ш
3 Ph
2. Enter Volts:
    VOLT 230.
3. Enter HP:
   IND* 50. hP
* Press   until iND is displayed in the
upper left area of the display.