Barco MFCD 1219 (TS) - Manual (Page 26)

On-screen display (OSD)
26
Settings menu
Note: The DPMS system will power down the display when the
connected computer is left idle for a certain time.
Barco recommends to switch DPMS on to prevent image burn-in
(image retention) on the LCD panel.
Function Description
OSD Settings
submenu Allows to switch the display power management
system on/off. See note below.
Factory Reset
submenu Allows to to reset all display parameters to the
factory default settings.
Language sub-
menu Allows to change the OSD language.
DPMS submenu Allows to switch the display power management
system on/off. See note below
LED submenu Allows to switch the power LED on/off.