Calculated Industries 6260 User Guide - Manual (Page 18)

The top legend displays
the following:
• SET
• CIRC (Circle)
• ARC
• M (Memory)
The Measure Status
and number of sides
are displayed here
(End or Closed are
displayed only when
a measurement has
been completed).
This area,
often referred
to as the “Main
Display,” is
used to display
values and
important
messages
Unit legend is
a description of
displayed values
(i.e. Square Feet, Inch)
USING THE ULTRA SCALE MASTER PRO
UNDERSTANDING THE LCD
Low Battery Indicator
The area immediately
below the legend displays
the following:
• PER (Perimeter)
• WL (Wall)
• HT (Height)
• AREA
• (PC Connection)
The selected Scale and Scale
Category or “Mode” are displayed
here. The Modes are as identifi ed:
• ARCH (Architectural)
• ENG I/ENG II (Engineering)
• CUST (Custom)
16 — U
LTRA
S
CALE
M
ASTER ®
P
RO