Calculated Industries 6250 - Manual (Page 16)

[M+]
Adds the displayed value to
accumulative memory (except when
setting a Custom Scale).
[SET] [M+] (M—)
Subtracts the displayed value from
the accumulative memory (except
during a measurement).
[MR] (Memory Recall)
First press displays the accumulative
memory value; second consecutive press
displays memory count; third consecutive
press displays the memory average.
Repeated presses cycle back through the
list of values.
4
RIGHT ARROW
Used to move through the digits
while setting a custom scale (see Custom
Scales setting).
[SET] [MR] (Memory Clear)
Clears the accumulative memory.
[PERIM]
Displays the calculated perimeter
(accumulated length) of the
measured points.
6
DOWN ARROW
Used to change the units of measurement
and decrease the selected digit while setting
a custom scale (see Custom Scales setting).
U
SER’S
G
UIDE
— 13