Panasonic p2, Sony xdcam, Sony xavc – Calibrated Software MXF Import v3 User Manual
Page 10: Ikegami gfcam, Canon c300, xf300/100, Avid media composer, Canon c300, Page | 7
Page | 7
The following MXF files will work with Calibrated{Q} MXF Import:
Panasonic P2
P2 Video Formats Supported
AVC-Intra 100/200, DVCProHD, DV50, DV25
P2 Camera Specific Notes
1.
P2 PullDown Removal and TimeCode conversion for regular PullDown 1080i29.97 and 480i29.97 material is not supported.
2.
P2 PullDown can only be detected and removed thru parsing the P2 XML file data. If the P2 XML for a MXF clip is not present then
pulldown cannot be detected or removed.
3.
AVC-Intra is not supported in Final Cut Studio 2 (FCP 6) or Final Cut Studio 2 applications.
Sony XDCAM
XDCAM Video Formats Supported
XDCAM HD 50Mb, 35Mb, 25Mb, XDCAM EX (converted to MXF from MP4 via Sony Clip Browser) , IMX, DV25
XDCAM Camera Specific Notes
1.
XDCAM HD 422
(50Mb) ‘Slow-Mo’ 1920x540 are only supported as in FCP7.0.3 or FCP X (v10.0.6 or greater)
2.
XDCAM Proxy audio will show as needing to be rendered in a FCP 6/7 Sequence; however when rendering the audio, FCP 6/7 will
report a ‘General Error’
Sony XAVC
XAVC Video Formats Supported
XAVC HD 100/200, XAVC 2k/3k/4k
XAVC Camera Specific Notes
1.
Final Cut Pro 7 will only work with XAVC HD MXF files. 1080p50 and 1080p59.94 XAVC files only have BETA support in FCP 7. Editing
2k/3k/4k XAVC MXF files would require using FCP X
Ikegami GFCAM
GFCAM Video Formats Supported
I-Frame MPEG2 100Mb 1080/720, Long-GOP MPEG2 50Mb 1080/720, I-Frame MPEG2 50/40/30Mb SD ( IMX-compatible format)
Canon C300,
XF300/100
Canon Video Formats Supported
XDCAM HD 422 (50Mb)
Canon Camera Specific Notes
1.
Canon XDCAM HD 422 (50Mb) ‘Slow-Mo’ 1920x540 are only supported as in FCP7.0.3 or FCP X (v10.0.6 or greater)
2.
True 24.0 FPS, 30.0 FPS or 60.00 FPS MXF files may not work properly in all applications
Avid Media Composer
Video Formats Supported
DNxHD, DVCProHD, DV50, DV25, AVC-Intra, XAVC , IMX, 1-1, 1-1-10b, Meridien, AS-02(BETA)
Avid Media Composer Specific Notes
1.
The separate Video and Audio MXF Files from Avid Media Composer will NOT be auto-joined, and will open as separate files.
2.
for Avid DNxHD, 1-1-10b, and Meridien MXF Files.
3.
If a DNxHD MXF file was captured or created without a TimeCode Track then a ‘fake’ when this happens TimeCode is set to 00:00:00:00
(always NDF if 29.97fps or 59.94fps) at the video rate embedded in the MXF file. This was done so that (a) the MXF files would have a
UUID ReelName and (b) Audio only MXF files could be identified with the proper video framerate. Please note that Audio only MXF files
without any associated video framerate cannot have a TimeCode Track associated with them.