Cineo Lighting Matchstix - Manual (Page 7)

7
Mounting and Accessory Attachment
Cineo Matchstix feature a standard camera cold-shoe running the length of the lamphead,
which is ideally suited for connecting the fixtures to virtually any surface using commonly
available grip equipment. All Matchstix kits are shipped with a swiveling adapter that provides
a standard ¼” x 20 tapped mounting hole. Additionally, both the back and side surfaces are
capable of accepting self-adhesive Velcro for attaching the Matchstix to a surface, or a lighting
control device to the front of the unit.
Specifications
Matchstix lampheads
Input voltage: 11-18 VDC
Power consumption: 100mA per inch 12”: 1.2A 6”: 600mA 3”: 300mA
Lamp head dimensions: 1.2” x 1.2” x 3.75” / 6.75” / 12.5”
(35mm x 35mm x 95mm / 171.5mm / 317.5mm)
Lamp head weight: 3” = .3 lbs. / 6” = .6 lbs / 12” = 1.2 lbs
(.136 kg / .272 kg / .544 kg)
Beam Angle: >160°
Environmental temperature range: -20 - +50 C
Fixture temperature in-use: 55 C
IP20 Rated
35,000 hr. L70 rated
2-year parts and labor warranty
Zero UV light emitted
Made in USA
LiteGear Power Supplies
4 AMP: Dimensions: 2.05”w x 4.70”l x 1.29”ht ( 52.1mm x 119.4mm x 32.8mm)
8 AMP: Dimensions: 2.40”w x 5.57”l x 1.40”ht (61.0mm x 141.5mm x 35.6mm)
15 AMP: Dimensions: 3.35”w x 8.25”l x 1.88”ht (85.0mm X 209.6mm X 47.8mm)
Cables and Splitters
Available Cable Lengths: 3’ (.9m), 6’ (1.8m), 12’ (3.6m)
Available Power Splitters: 1 x 2, 1 x 4