Cineo Lighting Matchstix - Manual (Page 8)

8
LiteGear Dimmers
LiteDimmer Single Dimmer
Weight: 0.682 lb. (10.912 oz), (309 g)
Dimensions: 3 3/4”l x 2 7/8”w x 1 1/2d”
Suitable AWG sizes for I/O: 26AWG to 12AWG max.
DC Power Rating: 12V/24V DC, 5A per channel or 16A total current.
DC Connector: Phoenix Contact, Combiconn 5.08mm, 7 pin (or 2+5)
E-Control 4x4 V3 DMX Controller
Weight: 0.682 lb. (10.912 oz), (309 g)
Dimensions: 6 3/4” x 2 9/16” x 7/8”
Suitable AWG sizes for I/O: 26AWG to 12AWG max.
DC Power Rating: 12V/24V DC, 5A per channel or 16A total current.
DC Connector: Phoenix Contact, Combiconn 5.08mm, 7 pin (or 2+5)
Warnings, Disclaimers and Warranty
Burning Injuries
Be aware of high temperatures in excess of 50ºC inside the lamphead during and after fixture
use. Do not touch the LEDs to avoid burning injuries.
Flammable Materials
Keep flammable materials away from the installation. Insure that the amount of air flow
required for safe operation of the equipment is not compromised. Proper ventilation must be
provided.
ESD and LED’s
LED components used in Matchstix are ESD (Electro-Static Discharge) sensitive. To prevent
the possibility of destroying LED components do not touch either in operation or while
switched off.
Blue Light Output
Do not bypass the lamphead safety switches that turn off the blue LEDs when phosphor
panels are removed. The light-output intensity may be harmful to human eyes. No UV or IR is
emitted at any time from this fixture.
AC Power Supplies and DC Cables
Use only a rated AC power supply. The user is responsible for ensuring DC power cables are
of adequate condition for each application. If the cables are damaged, replace them with new
ones.
Environmental: Disposal of Old Electrical & Electronic Equipment
This product shall not be treated as household waste.