Clearaudio MASTER INNOVATION - Manual (Page 10)

Master Innovation
User manual (set-up)
Page 10  Clearaudio Electronic GmbH 2014
7)
Take the drive platter out of the box and remove the protective film. Using both hands, place
the drive unit platter onto the bearing, so that the magnets are showing on the top. Please
be very careful.
8)
Place one of the two drive belts provided (the second is a spare) around the platter and
around the motor pulley.
Image 6: Placing the drive unit platter onto the bearing
Image 7: Placement of the drive belt