Clearaudio MASTER INNOVATION - Manual (Page 2)

Master Innovation
User manual (set-up)
Page 2  Clearaudio Electronic GmbH 2014
Dear Clearaudio customer,
Congratulations on your purchase of the Master Innovation turntable, a world class
turntable handmade in Germany by Clearaudio Electronic GmbH.
The Master Innovation’s state-of-the-art combination of a no-contact magnetic drive,
frictionless Ceramic Magnetic Bearing and self-regulating, sensor-controlled Optical Speed
Control guarantees incredible pitch stability and freedom from noise leading to unbelievably
realistic musical reproduction.
Its resonance minimizing chassis construction comprises four layers of a complex 'sandwich'
of aluminium – Panzerholz bullet-proof wood – aluminium, and includes provision for up to
three tonearms, allowing for complete flexibility of tonearm and cartridge.
Please note that this instruction manual contains a brief overview to enable quick and easy
set-up. A fuller instruction manual will be sent out in due course.
We wish you a great deal of musical enjoyment with your new Clearaudio Master Innovation
turntable.
Clearaudio Electronic GmbH
This section must be read before any connection is made to the mains supply.
CE-MARKING
The Clearaudio Master Innovation meets the regulations concerning electromagnetic
disturbance (EMC) and low-voltage appliances.
EQUIPMENT MAINS POWER SETTING
Your Clearaudio product has been prepared to comply with the household power and safety
requirements that exist in your area. This product can be connected to 230 V or 110 V AC
(50 Hz and 60 Hz).
COPYRIGHT
Recording and reproduction of any audio material may require the consent of the creator.
Please note relevant information given in the following:
-
Copyright Act 1956
-
Dramatic and Musical Performers Act 1958
-
Performers Protection Acts 1963 and 1972
-
any relevant recent legal regulations.
WARNING
Do not expose your turntable to rain or humidity.
Do not handle mains leads with wet hands.
Do not place or insert anything into the equipment or through the ventilation holes.
No naked flame sources, such as lighted candles, should be placed on the equipment
.